Precautions To Avoid Faults In A Transformer

Precautions To Avoid Faults In A Transformer




No doubt, a large amount of electricity used in industries for completing a number of applications smoothly. The safe use of electricity introduces the need of Transformer because they help to move electrical strength from one circuit to another and tackle load shedding problems without changing its frequency. Various types of transformers including Control, Three Phase, Isolation, Step Down, Rectifier, Auto and Special Purpose etc. obtainable in the market. Most probably they create the problem of overloading and tap changing, which affect its performance. Here are some shared precautions you can take to avoid the faults occur in this static device. So, take a look below and protect your device from any fault.

Load: One of the shared problems that create a number of faults in this static device is its loading capacity. Most of the time these transformers get overloaded and which in consequence the problem of short-circuit or fire shock may occur that can already take the shape of any big accident. To avoid this problem you should always install a transformer after analyzing the need of strength in your industry. Make sure the device you buy has the capability to manager the pressure of heavy load and never create any shredding or fluctuation problem while operating.

Internal Fault: The accumulation of gasses in the device is the major reason behind the internal faults, which are of two types;

  • Internal Phase To Earth Short Circuit
  • Internal Phase To Phase Short Circuit

To avoid any fault make sure you always use the right kind of transformer as per the need of your industry and inspect it on a continuous basis to avoid the problem of an oil leak.

Voltage Surge: Two shared types of surges occur in a transformer one is atmospheric and other is operating voltage surge. This may affect the performance of your device and create trouble in your production course of action. This problem can be controlled by the use of a varistor, which has no deleterious effects on switch gears in anyways.

All in all, your little bit attention at the time of its purchasing or installing can prevent you from a big loss. However, all the above precautions can also help you to avoid faults in a transformer. To ensure the safety of the device make sure you always buy it from a reputable Transformer Manufacturers. If you choose the right kind of transformer, properly install it at your worksite and follow all the above precautions, so, it may definitely help to remove all the barriers from your production.




leave your comment

Search

Top